L-Shape CGA540  Oxygen Regulator  for Medical Cylinder Valve

Products

L-Shape CGA540 Oxygen Regulator for Medical Cylinder Valve

Short Description:

Inlet pressure :150bar /200bar /300bar or other

Inlet thread :G5/8 male / W21.8×1/14 female or other

Flow meter range :0-10L/min  ,0-15L/min ,0-20L/min or other

Outlet connection:Diss / barb

Outlet pressure : 2-3bar , 1-2bar or other


Product Detail

Product Tags

Product Description

Detailed Description of  Oxygen Regulator for Peru Market

1.Input pressure  200bar
2.Output pressure 3bar
3.The Range of Flow  1-15L/min
4.Connection Thread  CGA540
5.Mainbody brass
6.Packing 20PCS/CTN (color box) or 10PCS/CTN

Medical Oxygen Regulator

The flowmeter  with humidifier is used in reducing gas pressure and adjusting the gas volume, which rescue patient and treat as oxygen therapy by hospital. Also may make using of other gas reduced pressure and the control flow.

Product main feature:

The product has artistic outlook, and flow control comfortable and stable.
The redactor  is adjustable; The structure is unique, and the performance is reliable.
The international standard connect way, is suitable for all kinds of gas bottle installation.

Range of application

Give oxygen for first-aid or oxygen uptake for the people who are lack of oxygen.

 How to use

1.Open the valve of oxygen cylinder after connect the screw nut of air intake closely.

2.Connect the oxygen pipe to the oxygen outlet firmly.

3.Demount the humidifying cup(anti clock wise rotation),put some distilled water in (purified water or plain boiled water can also take place),the water quantity should be between the bottom and top tick mark, then tighten up the bottle cap to the humidifying cup(clockwise rotation).

4.Rotate the flow regulating valve to the rate you need (anti clockwise to up, clockwise to down, till to close),then put it to nose to use.

5.Close the valve of oxygen cylinder firstly while not using, then close the flow regulating valve until the pointer of oxygen manometer return to zero.

Attention

1.Make sure there is no ash on the connector and check the screw thread, then install the inhalator.

2.Make sure the flow meter is vertical to the floor and flow regulating valve is closed, then open the valve of oxygen cylinder slowly, regulate the flow after the high pressure gauge shows the pressure of the oxygen cylinder.

3.No drastic shock, far away with the corrosive substance, and no oil stain.

4.The set screw of the safety valve can't be rotated at random, non-professional people are forbidden to dismount.

Condition for storage

Should be kept in the environment whose humidity is less than 90%,no corrosive gas and drafty.

Packaging & Shipping

Packing: 20pcs/CTN, or based on your requirements

Delivery time: 30 days after receipt of payment.

Our Services

1.Reply your enquiry in 24 working hours.

2.OEM brand is welcomed. 

FAQ

 Payment term: 30% T/T deposit, 70% T/T against B/L copy. 


  • Previous:
  • Next:

  • Write your message here and send it to us